B6 | B6D Fin Titanium steering turnbuckle – 10mm
Small pieces matter too with the introduction of the 10mm long Titanium steering turnbuckle for the B6 | B6D vehicle. The base of the design is centered around a square adjustment nut which blends down into the 3mm left and right hand threaded part. The titanium piece replaces the standard steel set screw which is rather bulky. The upgraded quality from JConcepts affects not just looks but performance as well.
The Fin turnbuckle is lightweight and the original design brings out the glamour and quality that makes titanium one of the most sought after exotic materials in the world. The JConcepts turnbuckles are produced with left and right hand threads for easy building and precise adjustment.
JConcepts turnbuckle adjustment wrench is offered separately as part # 2234.
Features:
· Original JConcepts design and “Fin” styling
· High-grade, machined titanium material
· Standardized 3mm thread base
· Left and right hand threads
· Aesthetic jewelry
B6 | B6D | B64 Fin Titanium shock stand-offs SHORT
Strength, performance and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium items replace the standard parts and feature a light-weight design and with built-in threads are more easily adjustable than their counterparts. The 7mm hex based design allows adjustment with the most popular wrench in the R/C arsenal but also tapers down featuring the Fin treatment found on the JConcepts turnbuckles.
Included with the stand-offs, the white in color Delrin pivot bushings are top-notch. The bushings are precision machined to slide on and off the titanium and allow the shocks floating freedom and just the correct amount of fore and aft movement. The bushings are asymmetrical; one-side features a taller shoulder which should be positioned toward the shock tower position on the vehicle. This taller shoulder helps maintain the shock in the correct position without falling back on to the stand-off itself.
The Fin stand-offs are lightweight and the original design brings out the glamour and quality that makes titanium one of the most sought after exotic materials in the world. The 2-piece set includes two 3x8mm BHCS to secure the stand-offs to the shock tower. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.
The “short” stand-off is a direct bolt-on part to the Team Associated B6 | B6D | B64 vehicles and should be used on the front shock tower.
Features:
· Direct fit for the front tower on the B6 | B6D | B64
· Original JConcepts design and “Fin” styling
· High-grade, machined titanium material
· 7mm Hex base material for ease of adjustment
· Built-in threads for weight reduction
· 3x8mm BHCS hardware included
· Machined Delrin pivot bushings
· Aesthetic jewelry
B6 | B6D | B64 Fin Titanium shock stand-offs LONG
Strength, performance and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium items replace the standard parts and feature a light-weight design and with built-in threads are more easily adjustable than their counterparts. The 7mm hex based design allows adjustment with the most popular wrench in the R/C arsenal but also tapers down featuring the Fin treatment found on the JConcepts turnbuckles.
Included with the stand-offs, the white in color Delrin pivot bushings are top-notch. The bushings are precision machined to slide on and off the titanium and allow the shocks floating freedom and just the correct amount of fore and aft movement. The bushings are asymmetrical; one-side features a taller shoulder which should be positioned toward the shock tower position on the vehicle. This taller shoulder helps maintain the shock in the correct position without falling back on to the stand-off itself.
The Fin stand-offs are lightweight and the original design brings out the glamour and quality that makes titanium one of the most sought after exotic materials in the world. The 2-piece set includes two 3x10mm BHCS to secure the stand-offs to the shock tower. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.
The “long” stand-off is a direct bolt-on part to the Team Associated B6 | B6D | B64 vehicles and should be used on the rear shock tower.
Features:
· Direct fit for the rear tower on the B6 | B6D | B64
· Original JConcepts design and “Fin” styling
· High-grade, machined titanium material
· 7mm Hex base material for ease of adjustment
· Built-in threads for weight reduction
· 3x10mm BHCS hardware included
· Machined Delrin pivot bushings
· Aesthetic jewelry
B6 | B6D | B64 Delrin shock stand-off bushings – 4pc.
Replacement Delrin pivot bushings are available for drivers looking to freshen up their vehicles who are using the JConcepts Titanium Stand-offs. The precision machined bushings offer several benefits over conventional parts and are offered four pieces per package. Please note, the asymmetrical design features a taller shoulder on one side which should be positioned toward the shock tower position on the vehicle. This taller shoulder helps maintain the shock in the correct position without falling back on to the stand-off itself
Features:
· Direct fit for JConcepts Titanium stand-offs
· Original JConcepts design
· High-grade, machined Delrin material
B6 | B6D Fin Titanium steering turnbuckle – 10mm, 1pc.
Part# 2598T
UPC Code – 845937017703
Retail price – $6.00
Map price – $5.10
(Fits – Team Associated B6 | B6D)
B6 | B6D | B64 Fin Titanium shock stand-offs w/ bushing – short
Part# 2599T
UPC Code – 845937017710
Retail price – $20.00
Map price – $17.00
(Fits – Team Associated B6 | B6D | B64)
B6 | B6D | B64 Fin Titanium shock stand-offs w/ bushing – long
Part# 2600T
UPC Code – 845937017727
Retail price – $20.00
Map price – $17.00
(Fits – Team Associated B6 | B6D | B64)
B6 | B6D | B64 Delrin shock stand-off bushings – 4pc.
Part# 2601
UPC Code – 845937017734
Retail price – $10.00
Map price – $8.50
(Fits – Team Associated B6 | B6D | B64)
One thought on “JConcepts New Release – B6 | B6D | B64 Option Parts”
Comments are closed.