Fuzz Bite LP (Wide) 2wd Front – Pre-Mounted
The team at JConcepts are always innovating and adding to an arsenal of fine racing tread patterns and compounds. The carpet and turf racing scene are hotter than ever, and with more courses, the team works harder than ever to deliver more options to a hungry crowd of racers. Introducing the pre-mounted Fuzz Bite in a wide body carcass, the 2wd front pin tire was designed into radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite front tire lands on a super low-profile, wide body carcass and mounted on the popular #3347 front wheel. The super low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
Always looking to improve, the R&D team focused on something that is not currently available, a wide 2wd front fitted to the JConcepts standard width from wheel. The result, a wider contact patch, smoother drive, and peak performing stability. The already proven Fuzz Bite alternating rows of pins provides side-bite, top steering response and the tightness of the package creates a nimble racing vehicle. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also additional mid-corner steering.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced un-sprung weight. During the gluing process, it is also handy to have some breathing room for the glue to process and the geometry gives many edges and ledges to adhere to.
The super low-profile tires are pre-mounted with custom low-profile, scalloped inserts to help support the center of the tire. The Mono wheel, the standard width race winning design since 2013 is used as the base feature in this pre-mounted package. The combination fits the majority of all 2wd off-road buggy vehicles including Team Associated, Schumacher, XRAY, Yokomo, Serpent, and Mugen.
Features:
• Pre-mounted on #3347 JConcepts wheels
• JConcepts original tire design, details, and materials
• Available on bright white or fluorescent yellow wheels
• Low profile, wide body carcass layout
• Reverse “water tower” pin shape
• Radius positioned pin arrangement
• Directional sidewall lugging
• Ultra-light weight scalloped tire beads
• Includes low-profile “scalloped” inserts
Pin Swag LP (Wide) 2wd Front – Pre-Mounted
Like the name suggests, the Pin Swag tire combines the outer lugs of a JConcepts Swagger front tire with the dense arrangement of specialty pins. Now optimized as a 2wd front tire and available as pre-mounted with wide body carcass, the pins themselves are round and crisp to the top where they climax to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge giving steering control.
The Swag is split down the center to give a little individual control to contort to surfaces. The wide carcass and large contact patch Pin Swag is pre-mounted on the popular #3347 front wheel and available in bright white or fluorescent yellow colors. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass like the successful Fuzz Bites rolls through the turns and transitions well at high and low speeds.
A unique feature on the Pin Swag and many of the JConcepts carpet | turf racing tires, is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue and the geometry gives many edges and ledges to adhere to.
The super low-profile tires are pre-mounted with custom low-profile, scalloped inserts to help support the center of the tire. The Mono wheel, the standard width race winning design since 2013 is used as the base feature in this pre-mounted package. The combination fits the majority of all 2wd off-road buggy vehicles including Team Associated, Schumacher, XRAY, Yokomo, Serpent, and Mugen.
Features:
• Pre-mounted on #3347 JConcepts wheels
• JConcepts original design, details, and materials
• Available on bright white or fluorescent yellow wheels
• Low profile, wide body carcass layout
• Pin and Swag combo pin / lug arrangement
• Hefty base pin with crisp ends
• Dense layout to help minimize wear
• Ultra-light weight scalloped tire beads
• Includes low-profile “scalloped” inserts
Fuzz Bite LP (wide) 2wd front – pre-mounted on 3347W wheels
Part# 4061-101011
UPC Code – 845937028846
Retail price – $27.00
Map price – $20.25
(Fits – 2wd buggy front)
Fuzz Bite LP (wide) 2wd front – pre-mounted on 3347Y wheels
Part# 4061-201011
UPC Code – 845937028853
Retail price – $27.00
Map price – $20.25
(Fits – 2wd buggy front)
Pin Swag LP (wide) 2wd front – pre-mounted on 3347W wheels
Part# 4062-101011
UPC Code – 845937028860
Retail price – $27.00
Map price – $20.25
(Fits – 2wd buggy front)
Pin Swag LP (wide) 2wd front – pre-mounted on 3347Y wheels
Part# 4062-201011
UPC Code – 845937028877
Retail price – $27.00
Map price – $20.25
(Fits – 2wd buggy front)