RC10 1989 Stealth, Front Bumper, 3D Print – Black
Part# 5307
The RC10 1989 Stealth car is a great piece, however, we noticed it was missing something, a front bumper. The JConcepts designers created and printed a new direct bolt-on item to give this piece of RC history the proper front protection it requires. Tested during the Team Associated Vintage Championships in Las Vegas, Nevada, Ryan Maifield put it through the paces and the item passed with flying colors. Designed to fit the vehicle, chassis, and front bulkhead, the front bumper requires 4-40 hardware (not included).
The SLS printed part in PA-12 material has shown great durability and is similar in performance and longevity to injection molded items. Although, no guarantees exist with 3D printing, we believe this part passes the test, stays within a reasonable budget, and allows the user to concentrate on building, and racing at the highest level.
Features:
• Genuine JConcepts design, fit, and finish
• Tested by Ryan Maifield
• Durable 3D printing, SLS PA-12 material
• Locates to stock chassis, and front bulkhead
• Requires 4-40 hardware (not included)
RC10 1989 Stealth, Battery Box & Electronic Tray, 3D Print – Black
Part# 5309
The RC10 1989 Stealth car is a great piece, however, there was an opening to provide a new battery mount location and add an electronics plate. The JConcepts designers created and printed a new direct bolt-on item to give this piece of RC history a fresh part capable of multiple duties. Tested during the Team Associated Vintage Championships in Las Vegas, Nevada, Ryan Maifield put it through the paces and the item passed with flying colors. Designed to fit the stock chassis and requires 4-40 hardware (not included).
The battery compartment is designed to fit a shorty 2s lipo battery placing it in a forward position. The rear of the 3D printed item is reserved for speed control mounting area with tunnel access to keep wiring clean and simple to receiver. This item is best used when combined with JConcepts #5306 forged carbon battery strap (not included). The SLS printed part in PA-12 material has shown great durability and is similar in performance and longevity to injection molded items. Although, no guarantees exist with 3D printing, we believe this part passes the test, stays within a reasonable budget, and allows the user to concentrate on building, and racing at the highest level.
Features:
• Genuine JConcepts design, fit, and finish
• Dual purpose battery box & electronics tray
• Tested by Ryan Maifield
• Durable 3D printing, SLS PA-12 material
• Locates to stock chassis
• Requires 4-40 hardware (not included)
RC10 1989 Stealth, Aluminum Servo Mount Bracket – Black
Part# 5311-2
Setting the trim on any RC car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. JConcepts introduces the servo mount bracket for the RC10 1989 Stealth car. Constructed of lightweight aluminum, the servo mount brace has been a staple for racing vehicles going back to 2015. The simple and sleek design with performance and tracking advantages have spoken volumes throughout the years on the racetrack.
The mount fits snug inside the chassis servo mounting area increasing the support while the 2 screw mounting locations are beefy in design and zeroed in for a direct mount to the chassis. The brace has locations on each side for set screws to help align and maintain servo position during racing conditions, crashes, and hard hits. The set screws are intended to touch off against the servo case and provide additional support retaining the servo in the intended position which helps maintain consistent steering trim.
The servo mount brace can be installed without any modifications or additional equipment in the RC10 1989 Stealth car. It is built to allow room for forthcoming #5301 aluminum steering bellcrank assembly and it works in conjunction with newly released #5314, #5315 JConcepts 14mm clamping servo horn. When all these items are used together, the steering system of the vehicle becomes an incredible improvement over stock components, has an ideal alignment between components, and maximizes steering throw in each direction.
Tested by Ryan Maifield during the Team Associated Vintage Championship, the servo mount bracket looked good, fit good, and installed easily. With a sleek wrap-around design, luster of aluminum, and etched Team JConcepts logo, the servo mount bracket adds consistency, performance tune-ability with aesthetic appeal. The new item is designed to use 4-40 hardware supplied by the user either off the stock model or from personal spare parts (not included). JConcepts is, World Proven Innovation and Design.
Installation notes –
To install, completely remove servo from vehicle and remove standard mounts. With the servo horn already in the correct position, align plastic shims or without as previously used on the servo. Install brace to each side and loosely fasten factory mounting screws with washers into the 4 locations and snug them. Now, center the servo between the brace and install the set screws on each side, use a light amount of thread locking compound (#8136) RM2 thread lock adhesive and snug them to touch off and keep the servo in place.
Completely clamp the 4 mounting screws on the front side to lock servo position. Remember to always use a light amount of thread locking compound when securing steel screws into aluminum. Reinstall the servo to vehicle and trim out and check EPA adjustments to complete assembly.
Features:
• JConcepts original design and function
• Machined aluminum, wrap-around concept
• Tested by Ryan Maifield
• Set screw-controlled centering feature
• Mounts directly to standard chassis locations
• Available in black anodized color
• Aesthetic jewelry
RC10 1989 Stealth, Body Mount Pad, 3D Print, 2pc – Black
Part# 5312
The RC10 1989 Stealth car is a great piece, however, we noticed room for a clean install of body mount pads on the side of the chassis. The JConcepts designers created and printed a new direct bolt-on item to give this piece of RC history the proper location for hook and loop tape fastening. Tested during the Team Associated Vintage Championships in Las Vegas, Nevada, Ryan Maifield put it through the paces and the item passed with flying colors. Designed to fit the chassis; while utilizing existing holes the body mount pads require 4-40 hardware (not included).
The SLS printed part in PA-12 material has shown great durability and is similar in performance and longevity to injection molded items. Although, no guarantees exist with 3D printing, we believe this part passes the test, stays within a reasonable budget, and allows the user to concentrate on building, and racing at the highest level.
Features:
• Genuine JConcepts design, fit, and finish
• Tested by Ryan Maifield
• Durable 3D printing, SLS PA-12 material
• Locates to stock chassis hole locations
• Requires 4-40 hardware (not included)
RC10 1989 Stealth, Steel Front Weight, 28gm – Black
Part# 5313
One of the popular accessories for vintage vehicles is chassis weight. Adding weight to the front can assist in consistent handling higher grip dirt tracks, and on carpet or astroturf conditions. The JConcepts designers added a front weight which bolts directly to the front of the RC10 1989 Stealth car. It is easily added or removed by using 4-40 locknuts (not included) on the top by using (not included) long FHCS screws from the bottom of the vehicle.
The steel front bulkhead weighs 28.3gm and is precision machined in steel and has a black oxide finish. The new item is laser etched with JC logo and weight listed for quick reference and authenticity.
Features:
• Genuine JConcepts design, fit, and finish
• Tested by Ryan Maifield
• Durable steel material with black oxide coating
• Locates to stock chassis hole and bulkhead locations
• Requires 4-40 hardware (not included)
RC10 1989 Stealth, 14mm Servo Horn, 23T – Black
Part# 5314-2
One of the critical points of racing comes from the steering servo and proper servo horn. The horn transfers all the torque from the servo to the steering bell cranks and this piece needs to be created with precision and durability. The JConcepts 14mm clamping servo horn created for the 23T count has all the necessary geometry to fit a vast assortment of vehicles. However, this horn is specially designed for the RC10 1989 Stealth car to fit under the top deck and provide proper angle and geometry.
The broad base of the horn tapers to the connection area where the steering takes place. The boss on top surrounds the ball-end and provides a hefty surface for steering direction. Small ribs have been added on the sides to help strengthen the unit in a twisting fashion and a deep pocket hides the 3mm standard mounting screw. The horn has laser etching with JC and the tooth count for high-end looks and authenticity.
Available in black anodizing, the 14mm clamping servo horn is great for vehicles such as the RC10 1989 Stealth car and others which require the same height. This servo horn is the perfect complement to forthcoming JConcepts #5301 aluminum steering bellcranks, and already available #5311 servo mount bracket. Tested by Ryan Maifield during the Team Associated Vintage Championships, the servo horn proved to be durable and correct geometry for the Stealth car.
Features:
• Precision machined aluminum
• 23T count, 14mm popular height
• Clamping style
• Lightweight / durable design
• Chamfer highlight edging
• Available in black anodized color
• Aesthetic, race- ready jewelry
RC10 1989 Stealth, 14mm Servo Horn, 25T – Black
Part# 5315-2
One of the critical points of racing comes from the steering servo and proper servo horn. The horn transfers all the torque from the servo to the steering bell cranks and this piece needs to be created with precision and durability. The JConcepts 14mm clamping servo horn created for the 25T count has all the necessary geometry to fit a vast assortment of vehicles. However, this horn is specially designed for the RC10 1989 Stealth car to fit under the top deck and provide proper angle and geometry.
The broad base of the horn tapers to the connection area where the steering takes place. The boss on top surrounds the ball-end and provides a hefty surface for steering direction. Small ribs have been added on the sides to help strengthen the unit in a twisting fashion and a deep pocket hides the 3mm standard mounting screw. The horn has laser etching with JC and the tooth count for high-end looks and authenticity.
Available in black anodizing, the 14mm clamping servo horn is great for vehicles such as the RC10 1989 Stealth car and others which require the same height. This servo horn is the perfect complement to forthcoming JConcepts #5301 aluminum steering bellcranks, and already available #5311 servo mount bracket. Tested by Ryan Maifield during the Team Associated Vintage Championships, the servo horn proved to be durable and correct geometry for the Stealth car.
Features:
• Precision machined aluminum
• 25T count, 14mm popular height
• Clamping style
• Lightweight / durable design
• Chamfer highlight edging
• Available in black anodized color
• Aesthetic, race- ready jewelry
JConcepts – RC10 1989 Stealth, front bumper, 3D print – black
Part# 5307
UPC Code – 845937040329
Retail price – $17.00
Map price – $14.45
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, battery box & electronic tray, 3D print – black
Part# 5309
UPC Code – 845937040336
Retail price – $42.00
Map price – $35.70
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, aluminum servo mount bracket – black
Part# 5311-2
UPC Code – 845937040244
Retail price – $25.00
Map price – $21.25
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, body mount pad, 3D print, 2pc – black
Part# 5312
UPC Code – 845937040343
Retail price – $17.00
Map price – $14.45
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, steel front weight, 28gm – black
Part# 5313
UPC Code – 845937040251
Retail price – $20.00
Map price – $17.00
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, 14mm servo horn, 23T – black
Part# 5314-2
UPC Code – 845937040268
Retail price – $20.00
Map price – $17.00
(Fits – RC10 1989 Stealth car)
JConcepts – RC10 1989 Stealth, 14mm servo horn, 25T – black
Part# 5315-2
UPC Code – 845937040275
Retail price – $20.00
Map price – $17.00
(Fits – RC10 1989 Stealth car)